Series 'F' Fan Coil Units comprise of a dual purpose coil with separate connections for chilled and hot water drip tray, resiliently mounted slide-out fans / motor platform, electrical connections box with auto transformer and air filter, These components are assembled into basic and cased models.

Each basic model has galvanised sheet steel self finished panels, assembled to form an enclosure. Each cased model has mild steel powder coated panels, extruded aluminium alloy grille(s) and rounded MDF side panels.

Model HB

Horizontal basic ceiling mounting 'draw through' unit has an integral discharge plenum with rectangular flange. The unit inlet has a similar rectangular flange.

A spigot plate and circular spigots - optional accessories, can be fitted to the discharge and / or inlet flange.

Each side of the discharge plenum has a circular aperture fitted with a blank plate which can be removed and replaced with optional accessory - circular spigot.

Separate bottom panels are provided for access to the fans / motor platform and air filter. The dual purpose coil and fans / motor platform are removable from the bottom of the unit.

Models VBB and VBF

Vertical basic 'blow through' units with top discharge spigot. Both models have a front access panel to allow the dual purpose coil and fans / motor platform to be removed from the front.

Model VBB, wall mounting bottom inlet, has a filter which may be tilted down, to allow removal without detaching the access panel.

Model VBF, floor mounting front inlet, has a filter which lifts out from the front of the unit without detaching the access panel.

Model HC

Horizontal ceiling mounting cased 'blow through' unit with rounded MDF side panels and curved outlet grille. A hinged inlet grille is provided for filter access. A separate bottom access panel with concealed fixings, allows the dual purpose coil and the fan / motor platform to be removed from the bottom of the unit. All model HC units are complete with suspension brackets and condensate pump.

Model VC

Vertical cased wall mounting 'blow through' unit with rounded MDF side panels and curved hinged outlet grille for access to optional accessories - switches and controls. Front access panel has concealed fixing. Filter is hinged and can be removed without removing the front access panel.